Samsung A32 SM-A325F Android 13 Latest Binary 2024 Security FRP Bypass Done

by

To bypass the FRP (Factory Reset Protection) on the Samsung A32 (SM-A325F) running Android 13 with the latest binary security patch of 2024, you can follow a reliable and safe method using advanced tools like Odin or third-party software like Z3X Box or SamKey. Below is a step-by-step guide that explains the process of FRP removal on this device.

Requirements:

  1. Samsung A32 (SM-A325F) with FRP enabled.
  2. PC or Laptop running Windows.
  3. Odin (for flashing firmware).
  4. Samsung USB Drivers installed on your PC.
  5. USB Cable for connecting your device to the PC.
  6. FRP Bypass Tool (e.g., Z3X Box, SamKey, or Octopus Box).

Step-by-Step Guide to Bypass FRP on Samsung A32 (SM-A325F)

Step 1: Install Samsung USB Drivers on Your PC

Before proceeding, make sure you have the Samsung USB drivers installed on your PC to ensure proper detection of your device. You can download these drivers from the official Samsung website.

Step 2: Enable Developer Options and USB Debugging

  • Power on your Samsung A32 and go to Settings.
  • Scroll down and tap on About Phone.
  • Tap on Software Information and find the Build Number.
  • Tap the Build Number 7 times to enable Developer Options.
  • Go back to the Settings menu, then tap on Developer Options.
  • Enable USB Debugging and OEM Unlocking if it’s available.

Step 3: Download the Latest Firmware for Samsung A32

  • Download the latest firmware that matches your device model and the Android 13 version with the 2024 security patch.
  • You can use trusted websites like SamMobile or Firmware.mobi to download the firmware.

**Step 4: Boot the Device into Download Mode

  • Power off the Samsung A32.
  • Press and hold the Volume Down + Power Button together until you see the Warning screen.
  • Then press the Volume Up button to enter Download Mode.

Step 5: Connect the Samsung A32 to the PC

  • Use a USB cable to connect your Samsung A32 to the PC.
  • Wait for the device to be detected by the Odin software or other tools.

Step 6: Flash the Latest Firmware (Optional for Some Tools)

  • Launch the Odin tool on your PC.
  • Load the firmware files (BL, AP, CP, and CSC) into the corresponding sections in Odin.
  • Make sure Auto Reboot and F. Reset Time are checked.
  • Click Start to begin the flashing process. Wait until it finishes, and the device will reboot automatically.

Step 7: Use FRP Bypass Tool

If you’re using a tool like Z3X Box, SamKey, or Octopus Box, you’ll need to:

  • Open the FRP Bypass Tool and follow the on-screen instructions.
  • Select Samsung A32 (SM-A325F) model and make sure you select Android 13.
  • Choose FRP Bypass and proceed with the steps provided in the software.

Step 8: Reboot and Complete the Setup

  • After the FRP removal is complete, your device should reboot without asking for the Google account credentials that were previously associated with the device.
  • You can now complete the setup process without the FRP lock preventing access.

Conclusion

By following the above steps, you can successfully bypass the FRP lock on your Samsung A32 SM-A325F running Android 13. Always ensure to use legitimate tools and official methods to avoid any complications. If you need assistance during any part of the process, feel free to reach out.

Leave a Comment